5 Series E39 523i (M52TU) TOUR
Release screws (1).
Remove retaining plate (2).
Withdraw solenoid valve (1, 2 or 3) or pressure regulator (2, 3 or
4).
Installation:
Coat new solenoid valve with ATF.
Installation:
Note installation position of retaining plate (2)!
Curved surface of retaining plate (2) must point to solenoid
valve or pressure regulator.
Install screws (1).
Tightening Torque,
refer to Technical Data 24 34 6AZ.
RA Replacing solenoid valve or pressure regulator (A5S 325Z)
BMW AG - TIS
16.02.2013 07:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
