5 Series E39 523i (M52TU) TOUR
24 40 002
Removing and installing or replacing torque
converter (A5S 325Z)
Note:
After completing work, top up ATF level.
Check/top up fluid level in automatic transmission,
refer to 00 11 500.
Remove automatic transmission,
refer to 24 00 029.
It is absolutely essential to use the approved automatic
transmission fluid in this automatic transmission,
refer to BMW Operating Fluids MG24.
Failure to comply with this requirement will result in serious
damage to the automatic transmission!
Screw special tool 24 4 000 into the torque converter.
Note:
When torque converter is removed, transmission oil flows out.
Remove torque converter.
Caution!
When installing, avoid that radial seal and bearing are damaged.
If the torque converter is not correctly installed, the driver of the
pump impeller may be damaged when the transmission is flanged
to the engine.
RA Removing and installing or replacing torque converter (A5S 325Z)
BMW AG - TIS
16.02.2013 08:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -