5 Series E39 523i (M52TU) TOUR
31 12 001
Replacing left or right control arm (Basis)
Caution!
After assembly, align/adjust front axle.
Remove engine splash guard.
Unfasten nuts (1 and 2).
Remove control arm from front axle support.
Installation:
Tapered spigot and bore both free of grease.
Fit washer (3). Replace self-locking nut. Tightening Torque, if
necessary brace on hex cap head,
screw (1), refer to Technical Data 31 12 2AZ;
screw (2), refer to Technical Data 31 12 6AZ.
Press control arm off swivel bearing with special tool 31 2 240.
RA Replacing left or right control arm (Basis)
BMW AG - TIS
16.02.2013 08:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
