5 Series E39 523i (M52TU) TOUR
34 10 014
Adjusting handbrake
Special tools required:
•
34 1 030
Perform inspection in the following manner:
When 1st tooth is engaged, no braking effect should be
present.
The difference on wheel circumferential forces (left / right
wheel) must not deviate from larger value by more than 30
%
(measured on the roller test rig).
In event of greater deviations of wheel circumferential
force, it is essential to carry out a readjustment.
It should be possible to hold vehicle with handbrake.
The handbrake must be readjusted whenever the actuation
stroke is greater than 10 teeth.
Note:
Handbrake can only be adjusted correctly if handbrake cables
and all moving parts of handbrake move easily and function
correctly.
Basic handbrake adjustment is necessary when:
-
Replacing handbrake shoes.
-
Replacing brake disks.
-
Resetting adjustment unit.
-
Excessive actuation stroke (10 teeth).
-
Replacing handbrake Bowden cables.
RA Adjusting handbrake
BMW AG - TIS
16.02.2013 10:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -