5 Series E39 523i (M52TU) TOUR
Adapt cross member, luggage compartment floor, rear (1), and
mark out mating surfaces on luggage compartment floor.
Remove crossmember, luggage compartment floor, rear.
Clean mating surfaces on luggage compartment floor on both
sides and coat with zinc dust paint.
Clean mating surfaces on cross member, luggage compartment
floor, front and rear, on both sides and coat with zinc dust paint.
Install, locate and weld crossmember, luggage compartment floor,
rear (1).
Grind down welded surfaces.
RA Replacing rear luggage compartment floor completely (rear left side wall and tai
BMW AG - TIS
16.02.2013 12:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 12 -
