bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Adjusting Trunk Lid To Fit (touring)|Page 2241 > < 1 RA Adjusting Trunk Lid To Fit (touring)|Page 2239
Page 9
background image

Release screws in lower section of lock so that it can be moved
and center itself.

Caution!

Before closing the rear window frame and when closing the
rear window frame, ensure that the body and/or rear window
frame are not damaged.

Carefully close rear window frame.

Adjust gap dimensions and position of rear window frame relative
to other fittings on body,

refer to 41 00.

Caution!

On transition area between roof/trunk lid, trunk lid must not
extend above height of roof otherwise wind noise will be
created.

To adjust height of rear window frame, insert spacers between
hinge bracket and rear window frame.

RA  Adjusting trunk lid to fit (touring)

BMW AG - TIS

16.02.2013  12:39

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 9 -

1 RA Adjusting Trunk Lid To Fit (touring)|Page 2241 > < 1 RA Adjusting Trunk Lid To Fit (touring)|Page 2239