5 Series E39 523i (M52TU) TOUR
51 12 001
Replacing rear bumper (touring)
Remove complete rear bumper,
refer to 51 12 000.
Only for replacing rear bumper trim (51 12 157) and
replacing rear bumper (51 12 001):
Remove rubber guard for bumper, rear side, left and right,
refer to 51 12 435.
Version with Park Distance Control (PDC):
Release ultrasonic converter (1) and pull off bumper. Carefully
unclip cable bracket (2).
Thread cable out of bracket (3) and bumper.
Unfasten expanding rivets (1) and remove heat shield (2).
Unfasten expanding rivets (1) and remove center section of
bumper (support beam).
Unclip finisher (2) for towing eye and unfasten retaining strap.
RA Replacing rear bumper (touring)
BMW AG - TIS
16.02.2013 12:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
