bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Removing And Installing_replacing Trunk Lid Lock (upper Section Of Trunk Lid Loc|Page 2378 > < 1 RA Instructions For Automatic Rear Lid Actuation (electrohydraulic_fully Automatic)|Page 2376
Page 1
background image

51 24 100

Removing and installing/replacing trunk lid
lock (upper section of trunk lid lock)(touring)

Removing trim panel from trunk lid, 

refer to 51 49 000

Lift out clip (1) from upper section of trunk lid lock (2).

Only when replacing emergency release mechanism:

Lift out clip (1) and remove emergency release mechanism (2).

Installation:

Mark position of upper section of trunk lid lock on bracket.

Pull off connectors.

Unfasten screws and lift out upper section of trunk lid lock
together with actuator drive.

RA  Removing and installing/replacing trunk lid lock (upper section of trunk lid loc

BMW AG - TIS

16.02.2013  13:34

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 RA Removing And Installing_replacing Trunk Lid Lock (upper Section Of Trunk Lid Loc|Page 2378 > < 1 RA Instructions For Automatic Rear Lid Actuation (electrohydraulic_fully Automatic)|Page 2376