5 Series E39 523i (M52TU) TOUR
Mount special tool 51 3 010 (without joint) opposite on inside of
window.
Mount special tool 51 3 090 (tensioning belt) at top on special tool
51 3 010 (1). Hook tensioning belt at bottom diagonally in lashing
eyes and pull tight (2).
Tension middle seat belt tensioner (4) until eye is approx. 400 mm
above floor insert (4).
Tension top seat belt tensioner (3) until eye can be pulled approx.
20 mm toward rear (4).
Caution!
Remove dirt from residual cement with Sika-Entferner 208
(Sourcing Reference: BMW Parts Service) before cement is
hard. Do not press side window back out. Hardened cement
can only be removed by machine.
Assemble car.
After the hardening time, remove adhesive tapes.
Note:
Leaks can be found by spraying water on the sealing lips or
with an ultrasonic leak detector (refer to BMW Parts Service)
and then eliminated by using a suitable nozzle.
RA Removing and installing left or right rear side window (touring)
BMW AG - TIS
16.02.2013 13:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -
