bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

7 RA Adjusting Luggage Compartment Loading Floor (pull-out) (touring)|Page 2542 > < 7 RA Adjusting Luggage Compartment Loading Floor (pull-out) (touring)|Page 2540
Page 4
background image

Adjust lateral clearance (C), front:

Press left/right rails (1) together and adjust lateral clearance (C) at
luggage compartment loading floor (2).

Lateral clearance (C), front = 0.2 mm to 1 mm.

Tighten left/right screws (3) on rails (1) at front (8.5 Nm).

Adjust lateral clearance (D), center:

Pull out luggage compartment loading floor (1) until screws (2) on
rail (3) are accessible.

Adjust lateral clearance (D) and tighten left/right screws (2) on
rails (3) at rear.

Lateral clearance (D), center = 1 mm to 2 mm.

Adjust lateral clearance (E), center/front:

Slide in luggage compartment loading floor (1) completely
(locked).

Load luggage compartment loading floor (1) in center with 75 kg
(e.g. sand bags (2) for wheel alignment check).

It must be possible to insert a strip of paper (3), corresponding to
lateral clearance (E), between the side rail (1) on the loading flor
and the fixed rail (2) on the left/right.

Lateral clearance (E), center/front = paper strip thickness.

RA  Adjusting luggage compartment loading floor (pull-out) (touring)

BMW AG - TIS

16.02.2013  14:16

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 4 -

7 RA Adjusting Luggage Compartment Loading Floor (pull-out) (touring)|Page 2542 > < 7 RA Adjusting Luggage Compartment Loading Floor (pull-out) (touring)|Page 2540