bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Removing And Installing Left Or Right Front Seat (normal _ Electric)|Page 2605 > < 1 RA Removing And Installing Left Or Right Front Seat (normal _ Electric)
Page 2
background image

Important!

Failure to comply with this disassembly sequence causes the
web (4) to break, thereby destroying the finisher.

Move front seat into furthest forrward position.

(1)

Raise centre finisher slightly on detent head,

(2)

Unlock and lift out inner clip tabs,

(3)

Pull finisher backwards to remove.

Only US driver's side:

Pull off detent (1) for longitudinal seat adjustment.

Unfasten screws.

Tightening torque, refer to Technical Data 52 10 1AZ

Move front seat as far back as possible.

(A) Unlock cover and fold forwards.

(B) Disconnect connector (1) and remove (2).

RA  Removing and installing left or right front seat (normal / electric)

BMW AG - TIS

16.02.2013  14:40

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

1 RA Removing And Installing Left Or Right Front Seat (normal _ Electric)|Page 2605 > < 1 RA Removing And Installing Left Or Right Front Seat (normal _ Electric)