bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

6 RA Removing And Installing _ Replacing Rear Panel On Left Rear-seat Backrest (load|Page 2675 > < 5 RA Removing And Installing_replacing Back-rest Frame For Rear Seat (through-loader)
Page 1
background image

52 26 199

Removing and installing / replacing rear panel
on left rear-seat backrest (load through
system)

Removing and installing backrest for left or right rear seat,

refer to 52 26 015

Remove both headrests.

Unscrew bolt (1).

Press lock finisher (2) somewhat upward until clip (3) is free and
carefully pull off toward outside.

Installation:

Clip (1) of finisher (2) may not be damaged.

Note:

Before removing seatbelt finisher strip (2), pull out 
safety belt (3) completely and secure against 
retracting (e.g. by knotting).

Unfasten screws (1) and pull out seatbelt finisher strip (2) for
safety belt (3).

RA  Removing and installing / replacing rear panel on left rear-seat backrest (load

BMW AG - TIS

16.02.2013  15:05

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

6 RA Removing And Installing _ Replacing Rear Panel On Left Rear-seat Backrest (load|Page 2675 > < 5 RA Removing And Installing_replacing Back-rest Frame For Rear Seat (through-loader)