5 Series E39 523i (M52TU) TOUR
Installation:
Clip (1) of finisher (2) may not be damaged.
Partially lift cover (1) off rear seat back-rest.
Remove retaining plate (1) and disconnect actuating rod (2) to
unlock back-rest.
Installation:
Fit bush (3) and new retaining plate (1).
Perform function check with rear seat back-rest folded
forward.
Note:
Place cloth (1) over locking rod to prevent the rear seat back-
rest from locking down.
Pry out actuating device (2) by pulling forwards and upwards.
RA Removing and installing/replacing actuating device for left rear seat back-rest
BMW AG - TIS
16.02.2013 15:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
