5 Series E39 525d (M57) TOUR
11 12 100
Removing and installing cylinder head (M57)
Special tools required:
•
00 2 530
•
00 9 120
•
11 2 300
•
11 3 340
•
11 6 050
•
11 6 321
•
11 6 322
•
11 6 480
•
13 5 020
Necessary preliminary tasks:
Instructions for disconnecting and connecting battery.
Disconnect battery negative terminal.
Remove cylinder head cover.
Remove A/C compressor drive belt.
Remove alternator drive belt.
Drain coolant.
Remove vacuum pump.
Caution!
When working on the oil, coolant or fuel circuit, you must
protect the alternator against contamination.
Cover alternator with suitable materials.
Failure to comply with this procedure may result in an
alternator malfunction.
If the charge air hoses are not fitted without grease and dry,
this will result in supercharger failure.
Fit charge air hoses without grease and dry.
RA Removing and installing cylinder head (M57)
BMW AG - TIS
17.02.2013 19:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
