5 Series E39 525d (M57) TOUR
Arrange individual spot welds so close together on connection
point for C-pillar that a continuous seam is created.
Caution!
Locate welding spots in a way which prevents distortion
caused by heat elongation. Ensure that welded areas have
cooled sufficiently.
Danger of distortion!
Arrange individual spot welds so close together on connection
point for D-pillar that a continuous seam is created.
Caution!
Locate welding spots in a way which prevents distortion
caused by heat elongation. Ensure that welded areas have
cooled sufficiently.
Danger of distortion!
Arrange individual spot welds so close together on connection
point for side member cover that a continuous seam is created.
Caution!
Locate welding spots in a way which prevents distortion
caused by heat elongation. Ensure that welded areas have
cooled sufficiently.
Danger of distortion!
Weld connection point for D-pillar in water drain.
RA Replacing rear left side wall (part replacement C- and D-pillar, top) (touring)
BMW AG - TIS
18.02.2013 11:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -
