bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Removing And Installing Luggage Compartment Lid, Rear Window Frame And Hinges Co > < 1 RA Adjusting Trunk Lid To Fit (touring)|Page 2178
Page 16
background image

Adjust gap dimensions, height and position of rear window frame
relative to other fittings on rear window frame,

refer to 41 00.

Note:

Do not alter inclination of striker (2) when adjusting height.

To adjust height of rear window frame at lock, release lock nut (1)
and turn striker (2).

Tighten down lock nut (1) again.

Caution!

After adjusting the rear window frame, always check

the position of the wiper axis relative to the drive disc and

the limit stop on the rear window wiper motor and adjust if
necessary,

refer to 61 62 060.

RA  Adjusting trunk lid to fit (touring)

BMW AG - TIS

18.02.2013  12:09

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 16 -

2 RA Removing And Installing Luggage Compartment Lid, Rear Window Frame And Hinges Co > < 1 RA Adjusting Trunk Lid To Fit (touring)|Page 2178