bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

ABOUT US
1 RA Removing And Installing, Sealing Or Replacing Oil Sump (M52 _ M52TU _ M54)|Page 569 > < 1 RA Removing And Installing, Sealing Or Replacing Oil Sump (M52 _ M52TU _ M54)

5 Series E39 525i (M54) SAL

Page 2
background image

Installation:

Replace O-ring.

Fit special tool 00 0 200 to special tool 00 0 201/202/204/208
and attach. Secure special tool 00 0 200 to the front suspension
lug on the engine.

Note:

The supports (1) of special tool 00 0 208 must make contact
with the screws on the side panels.

Tighten the screws (1 and 2).

Raise engine with special tool 00 0 200 approx. 5 mm.

RA  Removing and installing, sealing or replacing oil sump (M52 / M52TU / M54)

BMW AG - TIS

17.02.2013  19:21

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

1 RA Removing And Installing, Sealing Or Replacing Oil Sump (M52 _ M52TU _ M54)|Page 569 > < 1 RA Removing And Installing, Sealing Or Replacing Oil Sump (M52 _ M52TU _ M54)