5 Series E39 525i (M54) SAL
Remove front end reinforcement.
Detach steering spindle from steering gear.
Remove vane pump for power steering unit (lines remain
connected).
Disconnect plug connection to oil level sensor.
Loosen top and unfasten bottom of left and right engine mounts.
E46 4WD only
Remove left and right swivel bearings.
Remove output shafts.
Remove front propeller shaft.
Remove front axle differential.
Detach brackets for left and right control arms from engine carrier.
Release retaining brackets for left and right stabilizer bars.
Unfasten screw connection on front axle support and lower the
front axle support.
These operations are described in the work step Replacing front
axle support.
Note:
There is no need to detach the steering gear from the front axle
support.
RA Removing and installing, sealing or replacing oil sump (M52TU / M54 / M56)
BMW AG - TIS
17.02.2013 19:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -