5 Series E39 525i (M54) SAL
Release screws (1).
Tightening torque, 12 90 4AZ.
From 10/2000:
Note:
For purposes of clarity, locking clips (1) are shown with cover
opened.
After releasing screws, unlock both locking clips (1) and remove
cover.
1.
Control unit of Digital Motor Electronics:
Unlock plug connections and detach from DME control unit.
Remove DME control unit from retaining clips.
2.
Control unit for automatic transmission
Note:
Interrogate fault memory of DME control unit.
Check stored fault messages.
Rectify faults.
Then clear fault memory.
RA Replacing control unit (DME) (M52, M62, M54)
BMW AG - TIS
17.02.2013 20:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
