5 Series E39 525i (M54) SAL
12 41 020
Removing and installing/replacing starter
motor (M54)
Observe instructions for disconnecting and connecting battery.
Disconnect battery negative lead from battery.
Unlock plug (1) from pulse generator for crankshaft and detach.
Note:
For a better overview, this work step is shown on an engine that
has been removed.
Release nut (1) and disconnect battery positive leads from starter
motor.
Installation:
Tightening torque, 12 41 4AZ.
Release nuts (1).
Installation:
Tightening torque, 12 41 4AZ.
Detach leads (2) from starter motor.
RA Removing and installing/replacing starter motor (M54)
BMW AG - TIS
17.02.2013 20:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -