5 Series E39 525i (M54) SAL
Releasing both starter motor mounting bolts (1) on transmission:
Release starter mounting bolts from transmission output end with
a long extension and a universal joint.
Installation:
Tightening torque, 12 41 1AZ.
Pull starter motor (1) out of transmission flange and remove
towards bottom.
Installation:
Check starter motor pinion and ring gear for damage.
RA Removing and installing/replacing starter motor (M54)
BMW AG - TIS
17.02.2013 20:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
