5 Series E39 525i (M54) SAL
13 62 560
Removing and installing/replacing air-mass
flow sensor (M54)
Turn off ignition.
Unlock retainers (1) on intake filter housing.
Unlock plug (2) and detach from air-mass flow sensor.
Release hose clip (3).
Detach intake hose (4) from air-mass flow sensor.
Remove air-mass flow sensor.
Installation:
Check seal (1) between air-mass flow sensor and intake filter
housing for damage; replace if damaged.
To facilitate joint between air cleaner and throttle assembly, coat
gasket with acid-free grease.
Installation:
Only reinstall mass air flow sensor with undamaged lattice frame.
RA Removing and installing/replacing air-mass flow sensor (M54)
BMW AG - TIS
17.02.2013 23:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
