5 Series E39 525i (M54) SAL
Remove bracket for transmission underbody protection (1. . . 2)
and heat shield (3).
Detach cable plug (1) from reverse gear switch.
Detach cable from fixtures.
Caution!
Pressure line remains connected.
Slowly relieve tension on clutch slave cylinder during removal
as otherwise air will be drawn in through sealing sleeve.
Release nuts and remove clutch slave cylinder.
Tightening torque, 21 52 5AZ.
Remove stabilizer links from stabilizer bar 31 35 005.
Swivel stabilizer bar upwards.
RA Removing and installing transmission (S5D 310Z/S5D 320Z)
BMW AG - TIS
18.02.2013 00:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -