bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

14 RA Removing And Installing Automatic Transmission (A5S 325Z)|Page 1193 > < 13 RA Removing And Installing Automatic Transmission (A5S 360R _ 390R, M52TU_M54)|Page 1191
Page 1
background image

24 00 029

Removing and installing automatic
transmission (A5S 325Z)

Note:

After completing work, top up ATF level.

Check/top up fluid level in automatic transmission,

refer to 00 11 500.

Disconnect battery,

refer to instructions for disconnecting and connecting battery
MG12.

It is absolutely essential to use the approved automatic
transmission fluid in this automatic transmission,

refer to BMW Operating Fluids MG 24.

Failure to comply with this requirement will result in serious
damage to the automatic transmission!

Remove and install complete exhaust system,

refer to 18 00 020.

If necessary, remove assembly underguard at front.

Remove heat shield (1).

RA  Removing and installing automatic transmission (A5S 325Z)

BMW AG - TIS

18.02.2013  01:12

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

14 RA Removing And Installing Automatic Transmission (A5S 325Z)|Page 1193 > < 13 RA Removing And Installing Automatic Transmission (A5S 360R _ 390R, M52TU_M54)|Page 1191