5 Series E39 525i (M54) SAL
Clean magnets (1) and insert in oil sump again (2).
Install oil sump (2).
Insert all screws until contact is made with screw head in each
case.
Caution!
Using torque wrench, do not tighten screws diagonally but
once one after the other.
Do not tighten screws further.
Tightening Torque,
refer to Technical Data 24 11 5AZ.
RA Removing and installing/sealing or replacing transmission oil sump (A5S 325Z)
BMW AG - TIS
18.02.2013 01:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -