bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Arrangement Of Steering Gear (Basis) > < 1 RA Information On Replacing Steering Gear After Accident Damage|Page 1474
Page 1
background image

32 11 100

Replacing gaiter for steering gear on left or
right

Important!

Clean rack and steering tie rod.

Grease toothed area of rack,

refer to BMW Service Operating Fluids.

If the polished surface of the rack is damaged (rust), you must
replace the steering gear.

After installation:

Carry out steering angle sensor adjustment

Unscrew and remove splash guard.

Unfasten front straps and push sleeve off steering gear. Retract
rack as far as possible and unfasten tie rod joint.

Remove sleeve.

Installation:

Fit new sleeve on tie rod with tightening strap. Insert rack as far as
possible and screw on tie rod. 

Tightening torque 32 21 2AZ

.

Attach sleeve to steering gear with tightening strap.

RA  Replacing gaiter for steering gear on left or right

BMW AG - TIS

18.02.2013  02:51

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Arrangement Of Steering Gear (Basis) > < 1 RA Information On Replacing Steering Gear After Accident Damage|Page 1474