5 Series E39 525i (M54) SAL
32 31 595
Dismantling and assembling complete
steering column
Remove steering column,
refer to 32 31 090.
Remove ring antenna,
refer to 61 35 900.
Remove protective paint and unfasten grub screws. Remove
ignition starter switch.
Installation:
Secure headless screws with varnish.
Lift out snap ring (1) and take off with sleeve (2).
Installation:
Fit bush (2).
Attach snap ring (1) with special tool 32 1 090 and steering
wheel retaining screw, tightening it until it engages in groove
on steering spindle.
It is also possible to fit snap ring with special tool 32 3 070.
RA Dismantling and assembling complete steering column
BMW AG - TIS
18.02.2013 03:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
