5 Series E39 525i (M54) SAL
Weld connection point of rear window frame, wheel housing
extension.
Weld wheel arch in area (A).
Measurement (A) = 300 mm, measured from edge of cover for
side member.
Note:
The outer wheel arch section is not trimmed in this area so
that it can be welded with the rear side panel.
Note:
Work steps for M5 end here.
Weld connection point of rear window frame, wheel housing
extension and wheel arch.
RA Replacing the rear left side panel
BMW AG - TIS
18.02.2013 06:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 10 -
