5 Series E39 525i (M54) SAL
51 11 701
Replacing left or right bracket for front
bumper
(bumper removed)
Installation:
If necessary, mark position of bracket on body.
Unfasten screws from wheel arch and remove bracket (1).
Installation:
When exchanging bracket, adjust dimensions (A) and (B).
Dimension (B) is measured vertically downwards at distance
(C) from side panel.
(A) approx. 18 mm
(B) approx. 32 mm
(C) approx. 115 mm
Ideal adjustment:
Gap (A) should be uniform down full length between bumper and
aperture in body.
Dimension (A) = 5
±
1 mm
RA Replacing left or right bracket for front bumper
BMW AG - TIS
18.02.2013 06:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -