5 Series E39 525i (M54) SAL
52 17 200
Removing and installing/replacing top rear
panel on front seat backrest (luxury seat)
Note:
This document is also applicable to
L7 driver's seat with video system in rear compartment.
Move back-rest adjustment as far forward as possible.
Note:
If the back-rest adjustment unit is defective and in rear
position:
-
Unhook rear panel at bottom and allow to hang,
refer to 52 17 202.
-
Once upper rear panel has been removed, lower rear
panel can be unhooked,
refer to 52 17 202.
Pull both bottom corners of rear panel (1) (one after the other
where applicable) downwards and backwards (springs
disconnected at bottom).
Pull rear panel upwards/backwards (2) to remove.
Installation:
To avoid grinding noises:
Insert cover tabs (1) into openings in rear panel mounts.
Fit rear panel at bottom, press in towards top and snap into
place at bottom.
RA Removing and installing/replacing top rear panel on front seat backrest (luxury
BMW AG - TIS
18.02.2013 08:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -