bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

12 RA Removing And Installing _ Replacing Headliner For Glass Slide_tilt Sunroof Cover|Page 2519 > < 11 RA Removing And Installing_replacing Headliner For Sun-roof Lid|Page 2517
Page 1
background image

54 12 136

Removing and installing / replacing headliner
for glass slide/tilt sunroof cover

Installation:

If necessary, apply light coat of Renax GL1 (Fuchs) grease
to guide duct.

Removing left and right rubber gaiter for glass slide/tilt
sunroof cover,

refer to 54 12 015

Move mechanism into zero setting.

Slowly pull headliner forwards as far as it will go.

Unfasten left/right screws (1).

Lift headliner upwards to remove. 

RA  Removing and installing / replacing headliner for glass slide/tilt sunroof cover

BMW AG - TIS

18.02.2013  08:43

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

12 RA Removing And Installing _ Replacing Headliner For Glass Slide_tilt Sunroof Cover|Page 2519 > < 11 RA Removing And Installing_replacing Headliner For Sun-roof Lid|Page 2517