5 Series E39 525i (M54) TOUR
Insert special tool 11 3 480 in conrod.
Remove conrod with piston from cylinder head side.
Lift out retaining ring and press out piston pin.
Important!
Piston and piston pin are paired and must not be fitted
individually.
Installation:
Installation of pistons is described separately from removal. The
assembly sequence differs between removal and installation.
The piston pin must be able to be pressed through the liner by
hand with little force and must not display any significant play.
RA Removing and installing or replacing all pistons (M52 / S52 / M52TU / M54 / M56)
BMW AG - TIS
19.02.2013 17:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
