5 Series E39 525i (M54) TOUR
12 61 285
Replacing oil level sensor
Necessary preliminary tasks:
•
Switch off ignition
•
Unfasten oil filter cap to enable engine oil in filter to flow back
into the oil sump
•
Remove reinforcement plate
•
Drain off engine oil
Unlock plug (1) and remove.
Unscrew nuts.
Remove oil level sensor (2).
Installation:
Clean sealing face on oil sump.
Replace seal on oil level sensor.
Tightening torque 12 61 2AZ
.
Installation:
Top up engine oil.
Tighten down oil filter cap.
Tightening torque 11 42 2AZ
.
RA Replacing oil level sensor
BMW AG - TIS
19.02.2013 18:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
