5 Series E39 525i (M54) TOUR
Unfasten screws.
Installation:
Tightening Torque,
refer to Technical Data 24 11 1AZ.
Remove transmission extension.
Installation:
Install shim (1).
Replace O-ring (2).
Clamp special tool 24 1 220 in vise.
Fit transmission extension to the special tool.
Knock back cotter pin in grooved nut.
Installation:
Peen grooved nut to secure.
RA Replacing radial seal for output flange (A5S 325Z)
BMW AG - TIS
19.02.2013 20:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -