5 Series E39 525i (M54) TOUR
Note:
If retaining ring is damaged, it is advisable to cap pipe and
remove air spring.
Retaining ring can then be accessed more easily.
Push back protective cap (1).
Press together retaining ring (2) and pull off quick coupling.
Push protective cap onto connection.
Loosen bolts of air reservoir.
Pull rubber grommet out of body hole and remove line.
Guide in new pipe and ensure proper seating of rubber grommet!
Check correct seating of sealing rings (1 ...2) of pneumatic spring
and air reservoir.
Caution!
Do not under any circumstances grease sealing rings.
RA Removing and installing/replacing pipe (air line) for air spring to air reservoi
BMW AG - TIS
20.02.2013 00:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -