5 Series E39 525tds (M51) SAL
11 00 050
Removing and installing engine (M51)
Note instructions on removing and disconnecting battery,
refer to General Information MG 12
Lift engine hood into assembly position and remove firewall (air
manifold). These operations are described in section on removing
complete wiper console,
refer to 61 61 270
Unfasten screw plug from engine block and drain off coolant.
Installation:
Replace sealing ring.
Tightening torque,
refer to Technical Data 11 11 5AZ
Remove radiator,
refer to 17 11 000
Removing intake air manifold,
refer to 11 61 050
Remove transmission.
RA Removing and installing engine (M51)
BMW AG - TIS
19.02.2013 23:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
