bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing Alternator (M51)|Page 719 > < 3 RA Checking Alternator And Regulator Switch|Page 717
Page 1
background image

12 31 020

Removing and installing alternator (M51)

Interrogate fault memory of DDE control unit.

Switch off ignition.

Disconnect battery ground wire.

Remove alternator drive belt,

refer to 11 28 010.

Pull air cooling hose off alternator and remove air cooling hose.

Disconnect plug connection (1) from alternator.

Unfasten lower screw from alternator.

Release screws of oil tank for hydraulic steering on engine carrier.

RA  Removing and installing alternator (M51)

BMW AG - TIS

20.02.2013  00:14

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Removing And Installing Alternator (M51)|Page 719 > < 3 RA Checking Alternator And Regulator Switch|Page 717