5 Series E39 525tds (M51) TOUR
-
Remove fan impeller.
Refer to Repair Instructions 11 52
020
-
Unfasten sealing plug in wheel
housing cover.
-
Fit sealing plug with nipple and
tighten (30 Nm).
-
Cut leak-oil line to 400 mm and
push onto nipple.
-
Route leak-oil line along heater
return pipe and secure with at
least two cable ties.
Note:
It must be ensured that the cross-
section of the hose line is not
constricted by tightening the cable
ties.
-
Push leak-oil line onto brass
connection on vacuum unit of EGR
valve and secure with 1-ear hose
clamp.
Parts:
EGR valve
PN 11 71 2 247 177
Hose line
PN 11 71 2 247 099
1-ear hose clamp
PN 16 13 1 379 229
Sealing plug
PN 11 14 2 247 080
Reimbursement:
Material and labour costs incurred can be claimed through the usual warranty channels
subject to current warranty terms as follows:
SI Use of EGR valve with leak-oil recirculation E36 E38 E39 M51
BMW AG - TIS
19.02.2013 23:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -