5 Series E39 525tds (M51) TOUR
Version with screw cap:
Note:
Do not damage main flow oil filter cover. Only open and
tighten with socket wrench.
Unfasten full-flow oil filter cover, enabling engine oil to flow out of
oil filter and back into the oil pan.
Installation:
Tightening torque,
refer to Technical Data 11 42 2AZ
Installation:
Replace seals and coat with oil.
Unscrew and remove splash guard.
Open oil drain plug or drain off oil.
Installation:
Replace sealing ring.
Tightening torque,
refer to Technical Data 11 13 1AZ
Top up engine oil.
Switch on engine and run at idle until oil indicator lamp goes out.
Stop engine and check oil level.
Note:
Park vehicle on level ground.
RA BMW engine oil service (M51)
BMW AG - TIS
20.02.2013 01:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -