5 Series E39 525tds (M51) TOUR
11 13 000
Removing and installing, sealing or replacing
oil pan (M51)
Note:
For removal of oil pan, front axle support must be lowered.
There is no need to perform a front axle alignment check.
Remove engine splash guard.
Draining off engine oil,
refer to 00 0 249
Empty oil tank for hydro-steering. Release oil lines from hydro-
steering. Unfasten steering spindle from steering gear. These
operations are described in section on removing and installing
steering gear,
refer to 32 13 060
Remove cover for intake line.
Release rubber boot.
Fit special tool 00 0 200 to special tool 00 0 201/202/204/208
and attach. Secure special tool 00 0 200 to the front suspension
lug on the engine.
Note:
The supports (1) of special tool 00 0 208 must make contact
with the screws on the side panels.
RA Removing and installing, sealing or replacing oil pan (M51)
BMW AG - TIS
20.02.2013 02:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -