5 Series E39 525tds (M51) TOUR
Tighten the screws (1 and 2).
Raise engine with special tool 00 0 200 approx. 5 mm.
Brace front axle support with special tool 00 2 030 in
conjunction with special tool 31 2 220.
Unscrew engine mountings on bottom left and right.
Note:
When lowering front subframe, do not remove steering box
from subframe.
Unfasten screw connection on front axle support and lower the
front axle support.
These operations are described as part of the procedure for
replacing front-axle carrier,
refer to 31 11 001
RA Removing and installing, sealing or replacing oil pan (M51)
BMW AG - TIS
20.02.2013 02:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
