5 Series E39 525tds (M51) TOUR
Distinguishing feature:
-
(1) New version "without hose spring"
-
(2) Old version "with hose spring"
Caution!
The sealing lip of the new version (1) is very sensitive and
must not be kinked under any circumstances. Do not touch
the sealing lip with your fingers.
Note:
The end cover is in the set with the radial sealing ring.
If necessary, lift out the radial sealing ring and drive in new sealing
ring using special tool 11 1 260 in conjunction with special
tool 00 5 500.
Check for correct fit of hollow bushes (1).
Replace seal (2).
Apply thin, uniform coat of Drei Bond 1209 sealing compound
(refer to BMW Parts Service) to edges of joint on oil pan.
Caution!
Do not use special tool 11 2 213 for the new radial seal
version.
RA Replacing crankshaft radial seal (M41 / M51)
BMW AG - TIS
20.02.2013 02:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -