5 Series E39 525tds (M51) TOUR
Remove screw connection from toothed belt tensioner.
Installation:
Check O-ring, replace, if necessary.
Tightening Torque,
refer to Technical Data 11 14 3AZ.
Unfasten central nut (width across flanks 18).
Screw in special tool 13 5 120 without jack screw.
Remove inlet duct from alternator.
RA Removing and installing/replacing injection pump (M51)
BMW AG - TIS
20.02.2013 03:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
