5 Series E39 525tds (M51) TOUR
Secure nuts (1 and 2) before removing special tool 13 5 120.
Remove special tool 13 5 120.
Screw in central nut and tighten down.
Tightening Torque,
refer to Technical Data 13 52 2AZ.
Installation:
Check O-ring, replace, if necessary.
Install screw connection of toothed belt tensioner.
Tightening Torque,
refer to Technical Data 11 14 3AZ.
Statically adjust injection pump,
refer to 13 51 005.
RA Removing and installing/replacing injection pump (M51)
BMW AG - TIS
20.02.2013 03:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -