bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Removing And Installing _ Replacing Expansion Tank For Tank Ventilation > < 1 RA Removing And Installing Fuel Tank|Page 831
Page 1
background image

16 11 060

Removing and installing or replacing fuel
filler pipe

Suck out the fuel from the fuel tank,

refer to 16 00 005

Remove rear right wheel,

refer to 36 10 300

Remove rear right wheel arch trim.

Unfasten hose clip (1) and remove filler hose.

Unfasten hose clip (2) and remove vent hose.

Unfasten hex screw (3).

Installation:

Replace hose clips.

Unscrew the fuel filling pipe above.

Pull the fuel filling pipe completely out of the rubber gaiter at the
wheel housing.

Caution!

After installing the fuel filling pipe, check the electric resistor
between the ground lug (tank filling pipe) and the wheel hub.

Measured value: approx. 0.6 

RA  Removing and installing or replacing fuel filler pipe

BMW AG - TIS

20.02.2013  03:23

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Removing And Installing _ Replacing Expansion Tank For Tank Ventilation > < 1 RA Removing And Installing Fuel Tank|Page 831