5 Series E39 525tds (M51) TOUR
17 11 190
Removing and installing/replacing engine oil
cooler
Unfasten socket head cap screw (1) and remove bracket (2).
Remove oil lines (3) from oil cooler.
Caution!
Risk of scalding when engine is hot. When removing the oil
lines, catch and dispose of any oil which escapes. Always
check oil level after completing this operation and correct if
necessary.
Installation:
Replace O-ring (1). When attaching the lines, ensure that O-
ring (1) is correctly seated.
Unscrew bolts (1).
Pull panel (2) down a little.
Disconnect trim (1) and pull downwards to remove.
RA Removing and installing/replacing engine oil cooler
BMW AG - TIS
20.02.2013 03:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
