5 Series E39 525tds (M51) TOUR
Suspend filler neck (2) in filler opening.
Pour in automatic transmission fluid until overflowing.
Start engine and run at idling speed with selector lever in position
"P" or "N".
Top up automatic transmission fluid until overflowing.
Increase fluid temperature to 30 ... 55
°
C.
Check transmission fluid temperature with MoDiC or DIS.
Check fluid level again and top up if necessary.
Insert new filler plug (1) with new sealing ring and tighten.
Tightening Torque,
refer to Technical Data 24 11 7AZ.
RA Removing and installing/sealing or replacing both transmission oil pans (A4S 270
BMW AG - TIS
20.02.2013 04:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -