5 Series E39 525tds (M51) TOUR
Unfasten grooved nut (1) with special tool 24 1 170.
Installation:
Tightening torque,
refer to Technical Data 24 13 1AZ
Remove transmission extension from special tool.
Remove output flange from mounting.
Installation:
Coat sealing lip of radial seal and sealing surface of output
flange with transmission oil.
Lift out radial seal (1).
Installation:
Drive in new radial seal (1) flush using special tool 00 5 500
/ 24 1 190.
RA Replacing radial seal for output flange (A5S 310Z)
BMW AG - TIS
20.02.2013 04:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -