5 Series E39 525tds (M51) TOUR
Sealing connections on hydraulic unit and hose connections for
hydraulic cylinders:
Sealing hydraulic unit:
Use the seal plugs from the kit Banjo bolts for hydraulic unit* and
the old seals.
Installation:
Tightening torque, 51 24 1AZ.
Sealing hose connections:
Use the seal plugs with cap nuts from the kit Banjo bolts for
hydraulic cylinders* and the old seals.
*Sourcing reference: BMW Parts Service
RA Instructions for automatic rear lid actuation (electrohydraulic/fully automatic)
BMW AG - TIS
20.02.2013 10:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -