bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

5 RA Removing And Installing Left Or Right Rear Side Window (touring)|Page 2224 > < 5 RA Removing And Installing Left Or Right Rear Side Window (touring)|Page 2222
Page 5
background image

Caution!

Do not press down too hard on scalpel (risk of damaging the
PVC spray-coating).

Applying slight preload (2nd person pulling on special tool 51 3
010 attached to move rear side window outwards), carefully cut
away cement bead with scalpel cement around the C pillar.

Remove side window with special tool 51 3 010.

Remove cement residue from body aperture to thickness of
approx. 0.5 mm.

Cut off old cement carefully with an universal knife (sharp as a
razor blade) to avoid damaging the paint finish in body opening.

Pull off adhesive tapes all round.

Caution!

To provide long-term corrosion inhibition, damage to
paintwork (scratches and large areas of damage) should
always be touched up,

refer to 51 31 ...

RA  Removing and installing left or right rear side window (touring)

BMW AG - TIS

20.02.2013  10:45

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 5 -

5 RA Removing And Installing Left Or Right Rear Side Window (touring)|Page 2224 > < 5 RA Removing And Installing Left Or Right Rear Side Window (touring)|Page 2222